|
| |
|
In Line continuous
production selective soldering system
|
| EO80 In-line
Mini-Wave System |
 |
The
Streckfuss model E080 selective soldering system is an in-line process that
offers maximum flexibility through the use of a two-axis conveyor system
that eliminates the need for board holders, stencils or masks. SMEMA or
HS-180 compatible, the system can be easily integrated with existing surface
mount lines. The system user interface is via a personal computer running
the system software under Windows 2000. The Streckfuss software displays
both set points and actual values for all controllable parameters.
Programming is step & teach via a joystick and a two camera vision system.
|
|
Features
Specifications |
| Dual, Independent X-Y
Conveyor Systems |
Dimensions:
2000mm L x 1440mm W x 1270mm H
(80.0" L x 57.0" W x 50.0" H) |
| "Bubble-Spray" or Dispensing
Needle Flux Application |
Electrical:
400Vac, 3Ø, 50/60Hz, 25kw
(220Vac, 3Ø, 50/60Hz, 25kw) |
| Regulation of Flux
Application Volume |
Nitrogen:
3-6 m³/hr (105-211 ft³/hr) |
| Low Level Sensor for the
Flux Container |
Pneumatic:
6 bar (90psi) |
| Short Wave IR Quartz
Pre-Heating Elements |
Exhaust:
600 m³/hr (21,000 ft³/hr) |
| Pre-Heat Temperature Rise
Controlled to 2°C/Sec. |
Solder Bath:
80kg (176lbs)
|
| Optional IR Pyrometer for
Pre-Heat |
Solderable Area:
300 mm L x 330mm W - Standard(11.8" L X 13.0" W) 500mm L x 500mm W - Option
(19.6" L x 19.6" W) |
| Removable Belt Drive Solder
Pump Assembly |
| Localized N2
Inert Atmosphere |
| Interchangeable, Flowing
Fountain Solder Nozzle |
|
|
Batch production
selective soldering system
| Selectio Off-line Mini-Wave Selective
Soldering System |
|
|
|
The Selectio selective
soldering system provides an off-line process especially suited for low volume,
high mix applications. It’s design offers maximum flexibility through the
use of an x-y-z axis conveyor system that eliminates the need for board
holders, stencils or masks. The operator interface uses a personal
computer running the system software under Windows 2000. The graphics-based
software displays both set points and actual values for all controllable
parameters. Programming is step & teach via a joystick controller and a 3
camera vision system.
|
|
Features
Specifications |
| X,Y,Z Conveyor
System |
Dimensions:
1450mm L x 950mm W x 1260mm H
(57.0" L x 37.0" W x 50.0" H) |
| Interchangeable
Product Carriers or Stencils |
Electrical:
400VAC, 3Ø, 50/60Hz, 25kw
(220VAC, 3Ø, 50/60Hz, 25kw) |
| Spray or
Dispensing Needle Flux Application |
Nitrogen:
3-6 m³/hr (105-211 ft³/hr) - Optional |
| Regulation of Flux
Application Volume |
Pneumatic:
6 bar (90psi) |
| Flux Supplied From
Original Container |
Exhaust:
600 m³/hr (21,000 ft³/hr) |
| Low Level Sensor
For The Flux Container |
Solder Bath:
80kg (176lbs) - Standard |
| Medium-Wave IR
Quartz Pre-Heating Elements |
Solderable
Area:
300mm L x 330mm W - Standard
(11.8" L x 13.0" W) |
|
Pre-Heat
Temperature Rise Controlled to
2° C/Sec. |
|
| Optional IR
Pyrometer for Pre-Heat |
|
| Dual Chamber
Solder Bath* |
|
| Removable Belt
Drive Solder Pump Assembly |
|
| Optional Localized
N2 Inert Atmosphere |
|
| Flowing Fountain
or Surface Area Solder Nozzle |
|
|
"DESOLDO"
De-soldering Station |
 |
|
PinPointer
Selective Soldering System
Pocket solder, Fluxing station, Pre-heat, no
pumps, no nozzles, lead-free of conventional process, work station or
in-line |
|
More Information
Need Quote
|
|
|Flexible
Pick and Place |Soldering Products
|
Fume Extraction |
Conveyors |Opto Adhesives
|
|
UV Spot Cure | UV Radiometers |Tape and Reel
| SMT & PCB Equipment |Lead
Forming |
| Robotic Systems |X-ray Imaging
|PC Management Software |UV Germicidal |
|Inspect
& Measure |
News | Services | Contact Us |About Us| Site
Plan |
|
|
|
