|
SintroNex |
||
|
GAM 40 SMT Stencil Hole Cleaning Machine |
||
|
|
· Immediate cleaning ability for steel stencils on-line. · Overcomes the blind spot of auto-clean (dry/wet), cleans all solder paste on Fine-Pitch steel holes. · Cleans steel holes thoroughly by ultrasonic vibration, without harming the steel stencil. · No need for CFC solvent, no environmental pollution |
|
|
|
||
|
Features · Provides an immediate cleaning capability to the steel plate on-line; ensures the quality in continuous printing. · Cleans thoroughly the dirt located at the corners and edges. · Compact design and easy operation. · Upgrades the printing quality |
||
|
|
||
|
Application: Cleaning steel solder printing stencils |
||
|
|
||
|
Specification |
|
|
|
Electric Load |
35Watts |
|
|
Output Frequency |
40KHz |
|
|
Electric Power |
AC110V/60Hz, AC220V/50Hz |
|
|
Dimension of Controller (mm) |
370 x 250mm x 100mm |
|
|
Dimension of Head (mm) |
60mm x 60mm x 85mm |
|
|
Weight of Controller |
3 Kgs |
|
|
Weight of Head |
Injector 0.5 Kgs |
|
|
|
|
|
Operating Method |
|
|
|
Step 1 Place the absorption pad under the screen, and pour a small amount of solvent (ethanol, butyl acetate, etc) on the screen.
|
|
|
Step 2 Place the cleaning unit on top of the screen after the solder soften by solvent. |
|
|
Step 3 Switch on the power (manual/automatic control) |
|
|
Step 4 The pad absorbs the solder paste during the vibration. |
|
|
|
|
Views
Side View
Top View Rear View Units: mm |
|
|
Information contained in this data sheet is subject to change without notice | |Flexible Pick and Place |Soldering Products | Fume Extraction | Conveyors |Opto Adhesives | | UV Spot Cure | UV Radiometers |Tape and Reel | SMT & PCB Equipment |Lead Forming | |Inspect & Measure| Robotic Systems |X-ray Imaging |UV Germicidal | | News | Services | Contact Us |About Us| Site Plan |
|
|
