American Ultraviolet - UV Curing and Sterilization Systems

Ultraviolet Conveyor Technology

Custom UV Conveyor for Screen printing

Room Air Sterilization Equipment

CORNER-MOUNT ROOM STERILIZATION FIXTURES

Designed to mount in room corners with two keyhole slots at a height of seven feet, these attractive 120-volt, 60-Hz, 1.0 amp. (optional 220 volts, 50 Hz) units incorporate two 9,000-hour, nine-watt lamps and cover 75 square feet. Optional equipment includes an eight-foot power cord and an on/off switch. Lamps are installed on angles with reflectors for equal distribution of the germicidal energy. The louver restricts and concentrates the ultraviolet rays above eye level so personnel can occupy the room while the fixtures are operating. The units are shipped fully assembled with two electrical knockouts on top and bottom for wiring access.

Indirect Fan Assisted Room Air Sterilizer

TModel TB-36-2

A totally enclosed air movement/sterilization system, this unit comes complete with filters, fans and high-output slimline ultraviolet lamps. It is designed for rooms where congestion or ceiling height prohibits the use of wall-mounted indirect fixtures. Constructed of 304 stainless steel, each fixture produces six to eight air changes per hour in rooms up to 1,000 square feet. These models are designed for continuous upper air decontamination. They come completely assembled with a grounded power cord and switch.

Mobile Room Sterilizer

Model MRS3684P

This portable eight-lamp ultraviolet fixture features a time-delay and 24-hour timer for total room irradiation. It is designed for operating rooms, sterile areas, laboratories, unoccupied patient rooms, clean rooms and all other applications where permanent fixtures are not practical. Each unit is equipped with casters for maximum portability.

Industrial, Commercial, Hospital and Cooling Tower and Ground Water Purifiers

In-Duct/HVAC series Air Duct work UV Purifiers

● Sterile Conditioners For HVAC

Ultraviolet Point Curing Systems

"Green Spot" and "Emerald Spot" Point Curing Systems

 ● Clean-room-ready (Class 100)
 ● Total weight under 14 lbs.
 ● Small 9.75 x 12.5 inch footprint

Advanced Features:
 ● All anodized aluminum construction
 ● High-performance 100-watt, solid-state power supply
 ● Digital shutter time with foot switch
 ● Dual-fan cooling system
 ● Digital bulb-life-hour meter
 ● Manual/robotic shutter interface switch
 ● Standard 5mm x 1m liquid-filled light guide
 

Uniquely "Emerald Spot" Features:
 ● Stackable to save bench space
 ● Custom-made (quantities of six or more)
 ● Pneumatic shutters available for high-production

    volume at split-second intervals
 ● Clean-room compatible (up to Class 100)
 ● Total weight under 11 lbs.
 ● Small 8 x 13 x 13-inch footprint

Advanced Features:
 ● High-performance 100-watt, solid-state power supply
 ● Digital shutter time with foot switch
 ● Dual-fan cooling system
 ● Digital bulb-life-hour meter
 ● Manual/robotic shutter interface switch
 ● Standard 5mm x 1m liquid-filled light guide
 

 More Information

Need Quote

|Flexible Pick and Place |Soldering Products | Fume Extraction | Conveyors |Opto Adhesives |

 | UV Spot Cure  | UV Radiometers |Tape and Reel | SMT & PCB Equipment |Lead Forming |

  |Inspect & Measure| Robotic Systems |X-ray Imaging |UV Germicidal |

| News | Services | Contact Us  |About Us| Site Plan |