SintroNex
| UV Dosimeters QUANT-300, 400 are used for collecting information on UV energy dose and spectrum. This information can help to determine correct UV exposure time and to verify the quality of the optical element, UV lamp, lens, etc and set correct exposure time for different applications. The Dosimeters have been tested and are in use in production plants and labs of major US companies. | |
|
Patented. |
Quant UV Dosimeters and Radiometers are built to the US Patent 6,144,036 and other Patents approved and pending. |
Quant-300/400 |
Quant-300 has sensor with spectral
response 185-320nm.
Quant-300 is blind below 185nm & above 320nm |
Quant-400SP |
Quant-400 has
solid-state sensor with spectral response 320-390nm. It is blind below
300nm and above 400nm Quant-400BL, high sensitivity, range 0.001-1.999J/cm2, for low intensity UVA "black light" lamps. Quant-400P: for fast UV intensity measurements inside UV conveyors, UV presses, UV light sources, & UV ovens Quant-400S has sensor with spectral response 230-415nm. It is blind below 225nm and above 450nm. Quant-400SP: for evaluation of liquid filled and fiber quartz UV light guides. Quant-400SP - UVA (320-390nm) Radiometer with detachable probe. High Temperature Models of the Quant UV Dosimeters can operate at up to 150°C. The spectral sensitivity curve for Quant-400 is close to the standard UVA band |
|
UV Radiometers for intensity measurements. UVA Quant-Spotcure. UVA (320-390nm) radiometer for UV intensity of UV flexible liquid & fiber guides. UVC Quant-Spotcure. UVC (185-320nm) accepts 3mm, 5mm, 7mm, and 10mm OD light guides. Quant-400P and Quant-400SP - UVA (320-390nm) Radiometers with detachable probes. |
|
|
|Flexible Pick and Place |Soldering Products | Fume Extraction | Conveyors |Opto Adhesives | | UV Spot Cure | UV Radiometers |Tape and Reel | SMT & PCB Equipment |Lead Forming | |Inspect & Measure| Robotic Systems |X-ray Imaging |UV Germicidal | | News | Services | Contact Us |About Us| Site Plan | |
|
